Roof Leak Repair
Chimney Flashing Repair in Salt Lake City, UT
Chimney flashing repair in Salt Lake City addresses leaks where the roof meets the chimney. We inspect that joint and repair or replace damaged flashing to help keep water out of your home.
- Same-day service
- Open 24 hours a day, 7 days a week
- Garrett Sullivan has 16 years of chimney and fireplace experience
- Chimney work comes with a warranty starting from 2 years
Get a fast quote
Open 24/7Same-day serviceWarranty from 2 years16 years of experienceChimney & gas fireplace serviceClear advice, no upsellsWhen Chimney Flashing Repair in Salt Lake City Is Needed
Water stains near the chimney
A stain on a ceiling or wall near the chimney can point to water entering where the roof and chimney meet. We inspect the flashing joint to see whether damage there could be allowing moisture inside.
A leak appears after rain
Water showing up near the chimney after rainfall is a reason to check the roof connection, not just the room below it. We look for gaps, loose metal, or worn sealant around the flashing.
Flashing looks lifted or damaged
Bent, separated, or visibly deteriorated flashing can leave an opening around the chimney. Repairing that area may involve securing or sealing the existing material, or replacing sections that are too damaged to reuse.
A previous patch has failed
A patch that has pulled away or still lets water in may not address the underlying opening. We examine the flashing and the surrounding roof and masonry before recommending a repair or replacement.
You are unsure where the leak starts
Water can travel from its entry point before it appears indoors, so the visible stain may not sit directly below the problem. An inspection of the chimney-to-roof joint helps narrow down whether flashing is involved.
You need chimney and roof work assessed together
Flashing connects the roof and chimney, so damage around the joint can involve more than one surface. We check the area as a whole and identify whether the needed work is flashing repair, masonry repair, or both.
What Our Chimney Flashing Repair Covers
- Check the chimney-to-roof joint — We examine the visible flashing around the base of the chimney for gaps, loose edges, wear, or damage that could allow water through.
- Look at the surrounding surfaces — We assess the adjacent roof and chimney masonry so the repair addresses the area around the flashing, not only the spot where a leak became visible.
- Repair flashing that can be retained — Where the existing material is suitable for repair, we address the affected area, which may include securing loose sections or sealing an opening.
- Replace damaged flashing when needed — If flashing is too deteriorated or damaged to repair, replacement may be the appropriate scope. We explain why the work is needed before proceeding.
- Identify related chimney concerns — If we find a separate issue with the chimney structure, we explain what we see and whether additional work is needed. Masonry concerns may call for chimney repair beyond the flashing.
- Clarify the completed scope — We explain what work we recommend and why, then focus the repair on the affected roof-to-chimney connection. We recommend only services a homeowner needs.
Need help now? (385) 243-7715
How We Find and Repair a Chimney Flashing Leak
- Tell us what you have noticed — When you call, describe where water appears indoors and whether you can see damage around the chimney from the ground. Do not climb onto the roof to inspect it; we can assess the roof connection at the property.
- We inspect the flashing area — We examine the chimney-to-roof joint and nearby surfaces to locate visible damage and distinguish a flashing problem from a concern that may involve the roof or masonry.
- We explain the recommended work — We describe whether the existing flashing can be repaired or whether damaged material needs replacement. The scope depends on what the inspection finds, and we recommend only the work the home needs.
- We complete the agreed repair — We carry out the repair or replacement that fits the inspected condition. The time on site depends on roof access and the scope of work; we can explain the expected duration after assessing the job.
What Affects Chimney Flashing Repair Cost in Salt Lake City
The cost depends on the condition and extent of the flashing damage, whether the existing material can be repaired, and whether replacement is needed. Roof access and any related damage around the chimney can also affect the scope. We inspect the area and explain the work before moving ahead; the cost depends on what the job needs.
For a quote, call (385) 243-7715 or use our contact page to request one. If the concern turns out to involve soot or buildup inside the flue rather than water at the roof joint, our chimney sweep service addresses a different part of the chimney.
Need help now? (385) 243-7715
Why Homeowners Choose Utah Chimney Sweep for Flashing Repair
Garrett Sullivan, the owner, brings 16 years of experience with chimneys and fireplaces to the inspection and repair. We serve Salt Lake City and towns across the Wasatch Front within 60 miles, traveling to the customer’s home rather than asking you to come to us. We are open 24 hours a day, 7 days a week, and can provide same-day service. When you also need a chimney sweep in Salt Lake City, we can help with that separate service. Our chimney work comes with a warranty starting from 2 years.
More on chimney flashing repair
Related services
Guides on chimney flashing repair
Frequently asked questions
How much does chimney flashing repair cost in Salt Lake City?
The cost depends on the damage, whether the flashing can be repaired or needs replacement, roof access, and any related work around the chimney. We inspect the area and provide a quote based on the job’s needs.
How can I tell whether the leak is from chimney flashing?
Water stains near the chimney or a leak that appears after rain can be signs, but water may travel before it becomes visible indoors. An inspection of the chimney-to-roof joint helps identify whether flashing is the source.
Can you fix chimney flashing without replacing all of it?
That depends on the condition of the existing material and how much of it is damaged. We inspect the flashing first, then explain whether a repair is suitable or replacement is needed.
How do you replace chimney flashing?
First, we inspect the roof-to-chimney connection and determine the scope of damaged material. If replacement is needed, we explain the work for your particular roof and chimney before proceeding.
Is fireplace flashing repair the same as chimney flashing repair?
Flashing is at the roof where the chimney passes through it; it is not a part inside the fireplace. A leak near the fireplace may still come from the roof joint, so we inspect the chimney and surrounding area to locate the concern.
Can you come to my Salt Lake City home for flashing repair?
Yes. We travel to homes in Salt Lake City and towns across the Wasatch Front within 60 miles, and we offer same-day service. Call (385) 243-7715 to arrange an inspection.
Arrange a Chimney Flashing Inspection
Call (385) 243-7715 to describe the leak and arrange chimney flashing repair at your home in Salt Lake City or elsewhere in our service area.