Chimney Cap Service
Chimney Spark Arrestor Installation in Salt Lake City, UT
Chimney spark arrestor installation can address a damaged or missing screen at your chimney top. We check the existing cap and recommend the work your chimney needs.
- Garrett Sullivan has 16 years of chimney and fireplace experience.
- Open 24 hours a day, 7 days a week.
- Chimney cap installation starts at $250.
Get a fast quote
Open 24/7Same-day serviceWarranty from 2 years16 years of experienceChimney & gas fireplace serviceClear advice, no upsellsWhat a Chimney Spark Arrestor Does in Salt Lake City
A spark arrestor is a screen fitted at the chimney termination. It is designed to help keep sparks and embers from escaping while allowing smoke and exhaust to exit. The screen is commonly part of a chimney cap, so a missing, damaged, or obstructed screen may call for cap service.
Rust, holes, loose or bent mesh, and debris packed against the screen are visible signs that it may not be working as intended. A screen that is blocked can also interfere with the path exhaust takes out of the chimney. Don’t climb onto the roof to inspect it; a view from the ground can help you spot obvious damage without putting yourself at risk.
We check the cap and the condition of the arrestor before recommending installation or related work. If the cap itself needs attention, our chimney cap installation service covers the work involved in fitting a replacement cap. We explain what we find and recommend only the service your chimney needs.
Three Safe Checks Before Chimney Spark Arrestor Service
- Look from the ground — From a safe spot outdoors, look at the chimney top without climbing a ladder or onto the roof. Note whether the screen looks missing, visibly bent, rusted through, or covered by debris; a ground-level view may not show the full condition.
- Notice what happens during use — Pay attention to smoke that seems slow to leave, unusual smoke entering the room, or visible sparks escaping at the top. Stop using the fireplace if smoke is entering the living space, and arrange a chimney check before using it again.
- Keep the screen untouched — Don’t remove, bend, or try to clear the arrestor from the roof. Leave the cap and screen in place, and tell us what you observed so we can assess whether the issue points to the mesh, the cap, or another chimney concern.
Need help now? (385) 243-7715
Repair or Replace a Chimney Spark Arrestor?
Repair may make sense when the cap is sound and the problem is limited to a repairable part of the screen or its fit. Replacement is more likely to be appropriate when the screen has extensive rust, openings, or distortion, or when the cap itself is damaged or no longer fits the chimney. We inspect the visible condition and how the cap and screen sit before recommending either option; we don’t assume a new cap is needed just because the screen has a defect. If the cap needs replacing, see our chimney cap replacement service.
What Changes a Chimney Spark Arrestor Installation Estimate?
- Condition of the existing cap — A sound cap with a localized screen problem can involve different work from a cap that is damaged or needs replacement. We check both parts so the recommendation matches the condition we find.
- Fit and configuration — The chimney opening and the existing cap’s shape and fit affect what replacement work is appropriate. We assess the setup at the chimney rather than assume one screen or cap will fit every home.
- Access and visible damage — The condition of the chimney top and the access needed to reach it affect the work involved. Visible rust, bent material, loose parts, or debris can help us understand what needs closer inspection.
- Related chimney concerns — A spark arrestor issue may appear alongside damage to the cap or another visible concern at the chimney top. We explain any related work we recommend and separate it from the arrestor work.
Need help now? (385) 243-7715
Frequently asked questions
What is the starting price for chimney spark arrestor installation?
Chimney cap installation starts at $250. The estimate for your spark arrestor work depends on the existing cap, the fit needed, and whether the cap also needs replacement; call us to request a quote for your chimney.
Can you repair my spark arrestor, or does the whole chimney cap need replacing?
We check whether the problem is limited to the screen or whether the cap is also damaged or poorly fitted. A repair may suit a localized defect on an otherwise sound cap, while extensive damage can make replacement the better choice.
What should I tell you when I call about a spark arrestor?
Tell us whether the screen looks missing, rusted, bent, or blocked, and whether you have noticed smoke or sparks behaving differently. You can also share the home’s chimney or fireplace type if you know it; don’t climb up to gather details.
Do you install chimney spark arrestors in Salt Lake City?
Yes. We serve Salt Lake City and towns across the Wasatch Front within 60 miles, and we are open 24 hours a day, 7 days a week. Call (385) 243-7715 or request service to book a visit at your home.
Request Spark Arrestor Service
Call (385) 243-7715 or request service. We’ll check the chimney cap and explain the work we recommend.