Gas Appliance Venting
Gas Chimney Liner Installation in Salt Lake City, UT
Gas chimney liner installation in Salt Lake City addresses a flue that needs a liner suited to a gas appliance. We assess the chimney, explain the work, and recommend only the services your home needs.
- Chimney liner installation from $899
- Same-day service available
- Open 24 hours a day, 7 days a week
- Chimney work comes with a warranty starting from 2 years
Get a fast quote
Open 24/7Same-day serviceWarranty from 2 years16 years of experienceChimney & gas fireplace serviceClear advice, no upsellsWhen Salt Lake City Homes Need a Gas Chimney Liner
A gas appliance is being added
A new furnace, water heater, or fireplace may need a venting route suited to that appliance. We inspect the chimney and the proposed setup before recommending a liner, so the work addresses the actual installation rather than assuming an existing flue will fit.
An existing liner shows damage
Cracks, gaps, or deterioration in a liner can affect its ability to contain exhaust. An inspection helps identify whether the gas chimney liner needs replacement or whether another repair is the appropriate next step.
The appliance or venting setup has changed
Replacing an appliance can change what its venting system requires. Before installation, we check the current chimney and the appliance details, then explain whether a new liner is needed for the revised setup.
A fireplace or heating appliance is not venting as expected
Smoke or exhaust concerns deserve an inspection rather than a guess about the cause. We look at the flue and liner condition, then explain whether liner installation is relevant or whether another chimney or fireplace service is needed.
A home has a gas fireplace, furnace, or water heater connected to a chimney
Different gas appliances may call for different venting arrangements. We assess the appliance and chimney together, whether you are asking about a gas fireplace liner or a liner for another gas appliance.
What Gas Chimney Liner Installation Covers
- Review of the appliance and chimney — We identify which gas appliance connects to the chimney and inspect the accessible flue and liner condition. This gives us a basis for recommending work that suits the actual venting arrangement.
- Assessment of the existing flue — We check the route and condition of the chimney passage before proposing installation. Existing damage, obstructions, or other repairs can affect what needs to happen before a new liner goes in.
- A liner recommendation for the appliance — A chimney liner for a gas furnace, fireplace, or water heater must be considered in relation to the appliance it serves. We explain the recommendation and the work involved before proceeding.
- Installation planning — We account for the chimney’s access and the liner route when planning the job. If the inspection points to a repair that changes the scope, we explain that finding rather than treating installation as a one-size-fits-all task.
- Related chimney work when needed — A damaged chimney or liner may call for repair as well as installation. We can handle chimney repair and liner repair, and we recommend related work only when the chimney’s condition calls for it.
- Clear explanation of the completed work — We explain what we found and what work was completed, so you know which appliance the liner serves and what was addressed. Our chimney work comes with a warranty starting from 2 years.
Need help now? (385) 243-7715
How We Plan and Install a Gas Chimney Liner
- Call to arrange the visit — Call (385) 243-7715 and tell us which appliance is involved and what prompted the request. We are open 24 hours a day, 7 days a week, and can come out the same day you call. Have the appliance information available if you can; it helps us focus the inspection.
- We inspect the chimney and appliance setup — At your home, we assess the flue, existing liner, access, and the gas appliance connected to the chimney. Those findings help distinguish a liner installation from a repair or another service, including a chimney inspection when that is the work needed.
- We explain the scope and price — Before work proceeds, we explain the recommended service and the factors that affect the job. If the inspection uncovers a condition that changes the work, we explain that before treating the original estimate as the full scope.
- We complete the agreed work — We install the liner according to the work agreed for your chimney and appliance, then explain what was completed. The visit length depends on access, the chimney’s condition, and whether related repairs are part of the job; we can give you a clearer expectation after assessing those details.
Gas Chimney Liner Installation Price and Job Factors
Chimney liner installation starts at $899. The final price depends on the chimney’s condition, the liner route and access, and whether repairs or other work are needed before installation. A gas chimney liner for an existing setup may involve different work from a new installation connected to another appliance, so we inspect the specific chimney before confirming the scope.
We explain the recommended work and its price before proceeding, and we recommend only services a homeowner needs. For a separate chimney inspection, the starting price is $39. Call (385) 243-7715 or request a quote to arrange an assessment; same-day service is available.
Need help now? (385) 243-7715
Gas Chimney Liner Service from Utah Chimney Sweep
Owner Garrett Sullivan has 16 years of experience with chimneys and fireplaces. We explain what we find in plain language and recommend only the work your home needs, so you can understand why a liner installation is appropriate before moving forward. For other chimney needs, see our chimney repair service or learn about a chimney sweep.
We serve Salt Lake City and towns across the Wasatch Front within 60 miles. You can also learn about our chimney sweep in Salt Lake City; for this service, we assess your gas appliance and chimney as one venting setup rather than recommending a liner without checking the flue.
Related services
Guides on gas chimney liner installation
Frequently asked questions
Does a gas fireplace need a chimney liner?
It depends on the fireplace and the chimney’s existing venting arrangement. We inspect both before recommending a gas fireplace liner, because the right work depends on the appliance and the condition of the flue.
Can one liner serve a gas furnace and a gas water heater?
The appliance connections and chimney setup need to be assessed before deciding what liner arrangement is appropriate. We check the specific appliances and flue in your Salt Lake City home rather than assume one configuration fits every system.
How long does gas chimney liner installation take?
The time depends on access, the chimney’s condition, and whether repairs are part of the work. We can give you a clearer expectation after inspecting the flue and confirming the installation scope.
What does a gas chimney liner inspection check?
We assess the accessible flue and existing liner, look for damage or conditions that affect installation, and consider which gas appliance the chimney serves. That inspection helps determine whether you need a new liner, a repair, or a different chimney service.
Can you install a chimney liner for a gas water heater?
We assess the water heater and chimney together to determine what the venting setup needs. The liner recommendation depends on the appliance connection, the flue route, and the chimney’s condition.
How do I arrange gas chimney liner installation in Salt Lake City?
Call (385) 243-7715 to arrange a visit and share which gas appliance is involved. We are open 24 hours a day, 7 days a week, and can come out the same day you call.
Arrange a Gas Chimney Liner Assessment
Call (385) 243-7715 to schedule an inspection of your gas appliance and chimney. We will explain the work your home needs and the price before proceeding.