Skip to content
Open 24/7 Salt Lake City & nearby
Utah Chimney Sweep logo (385) 243-7715

How Much Does Chimney Removal Cost in Salt Lake City, UT?

In Salt Lake City, chimney removal cost depends on what the job needs; a chimney inspection starts at $39, while chimney liner installation starts at $899 as a separate option when keeping the flue makes sense. For a removal quote, contact us with details about what you want removed.

Our Starting Prices in Salt Lake City

ServicePrice
Chimney SweepFrom $89
Chimney CleaningFrom $89
Chimney InspectionFrom $39
Chimney Cap InstallationFrom $250
Chimney Liner InstallationFrom $899
Gas Fireplace ServiceFrom $49

Need help now? (385) 243-7715

What Changes the Cost of Chimney Removal?

The main cost factors are how much of the chimney comes out, its construction, access to the work area, and what must be repaired where the chimney meets the roof or home. Removing a chimney above the roof is a different scope from removing the full structure through the house.

The estimate also needs to account for connected parts. A fireplace, stove, flue liner, damper, chimney crown, flashing, and roof opening can each affect the work. Ask for the quote to identify which parts are included and what will remain in place.

Our prices include separate starting prices for some related work, but they are not chimney removal prices. The removal cost depends on what the job needs, so the scope should be assessed before you compare estimates.

Which Chimney Removal Option Fits Your Home?

The right scope depends on whether you want to stop using the fireplace, remove a visible roof structure, or keep the chimney system working. Ask the chimney professional to identify what connects to the chimney before agreeing to a removal plan.

Full chimney removal

This option addresses the chimney structure through the home, not just the portion visible above the roof. It may fit when you want the chimney gone entirely; the quote should describe how the opening and affected surfaces will be finished.

Removal above the roof

A limited scope may remove the exposed stack while leaving part of the structure below. Ask how the remaining masonry or flue will be closed and protected from water.

Keep the chimney and repair it

When you still want to use the fireplace or appliance, removal may not be necessary. A chimney inspection can help identify whether cleaning, repair, or a liner is the relevant next step.

How Related Starting Prices Compare With Removal

Consider three common situations before deciding what quote to request. If you are unsure whether a chimney is damaged or simply needs attention, a chimney inspection starts at $39. If the structure can stay but the flue needs a new liner, chimney liner installation starts at $899; that is a separate service, not a removal price.

If the chimney is structurally unwanted or you need it removed to change the home, ask for a chimney removal quote based on the full scope. If the only issue is creosote buildup and you plan to keep using the fireplace, chimney cleaning starts at $89, but cleaning does not replace structural repair.

Need help now? (385) 243-7715

What to Gather Before Requesting a Chimney Removal Quote

A few simple details help define the work without requiring you to climb onto the roof or take apart the fireplace.

Steps to Confirm the Chimney Removal Scope

A removal decision starts with understanding the chimney’s connections and ends with checking how the home is left. Keep the assessment and the removal work separate when reviewing the expected schedule.

  1. Identify the appliance — Tell the chimney professional whether the fireplace serves a wood-burning fire, gas appliance, or stove. Check that the appliance and its venting are included in the assessment.
  2. Describe the removal goal — Say whether you want the entire chimney removed or only the visible stack above the roof. Check that the written scope uses the same description.
  3. Review the flue and damper — Ask which flue liner and damper are connected to the fireplace or appliance. Check that the plan accounts for any connection that will remain after the chimney work.
  4. Confirm roof and masonry work — Ask how the chimney crown, flashing, and roof opening are addressed for the proposed scope. Check that the quote states what will be removed and what will be repaired or finished.
  5. Compare the alternatives — Ask whether inspection, repair, or a liner could meet your goal without removing the chimney. Check that each alternative addresses the condition you want resolved, rather than just changing the appearance.
  6. Set expectations for site time — The assessment visit determines the removal scope; its length depends on what needs to be examined and how accessible the chimney parts are. The removal work takes a separate amount of time based on the structure and finish work, so check that the project schedule covers both.
  7. Review the finished areas — After the work, check the agreed areas around the fireplace, remaining chimney, and roof opening. Confirm that each part named in the scope has been completed before treating the project as finished.

What Can Go Wrong With an Incomplete Removal Plan?

A quote focused only on the part of the chimney visible from outside can miss connections or repairs inside the home. Removing a section without accounting for the remaining flue, roof opening, or fireplace can leave an unfinished condition that does not match your goal.

Do not climb onto the roof or start dismantling masonry to estimate the job yourself. Loose brick, unstable structures, and open flues can create hazards; ask a chimney professional to assess the work. Our chimney removal service is the related service to request when you want the structure removed.

Need help now? (385) 243-7715

When to Choose Removal, Inspection, or Repair

Removal makes sense to explore when you no longer want the chimney structure or need it changed as part of a home project. If you want to keep using the fireplace, start by finding out whether the issue is buildup, damage, or a flue condition; those problems may call for cleaning, repair, or liner work instead.

Tell us what you want removed and whether a fireplace or stove still uses the chimney. We explain the work clearly and recommend only services a homeowner needs, so the proposed scope can match the actual job.

Frequently asked questions

Can I remove only the chimney above the roof?

A project may focus on the portion above the roof, but the remaining structure and flue still need a clear plan. Ask the chimney professional to specify how the top will be closed and how the roof area will be finished.

Do I need to remove a chimney if I no longer use the fireplace?

Not necessarily. You can keep an unused chimney, or ask about removal if you want the structure gone; first confirm whether another appliance or vent uses it.

Can I keep using my fireplace after chimney removal?

That depends on which part is removed and whether the fireplace still has a safe, working venting system. Confirm the effect on the fireplace and flue before approving any removal work.

How long does chimney removal take?

The assessment visit and removal work have different timelines. The visit length depends on what needs examination, while the project duration depends on the removal depth, chimney construction, access, and repairs to the affected areas.

Get a Chimney Removal Quote

Call Utah Chimney Sweep at (385) 243-7715 and describe what you want removed and whether the fireplace is still in use.

More helpful guides

(385) 243-7715 Get a quote