How Much Does Chimney Tuckpointing Cost in Salt Lake City, UT?

By Garrett Sullivan, 16 years of experience · November 12, 2026 · 6 min read

In Salt Lake City, a chimney inspection starts at $39; the cost of chimney tuckpointing depends on how much mortar needs repair and the condition of the surrounding masonry. Call us to request a quote for the tuckpointing work itself.

Our Starting Prices in Salt Lake City

Need help now? (385) 243-7715

How Much Does Chimney Tuckpointing Cost?

The confirmed starting price for a chimney inspection is $39. That is the price for an inspection, not a tuckpointing repair; the repair cost depends on the amount and location of deteriorated mortar and the condition of the surrounding brick or stone.

Tuckpointing removes failed mortar from joints between masonry units and fills those joints with replacement mortar. A small, accessible area is a different scope from damage spread across several sides of a chimney, so the amount of work—not simply the word “tuckpointing”—shapes the quote.

A chimney inspection can help identify whether the visible issue is limited to mortar joints or also involves brick, the crown, or flashing. See our prices for confirmed starting prices for other listed services, or ask us to assess the tuckpointing work you need.

What Chimney Tuckpointing Repairs—and What It Does Not

Tuckpointing addresses deteriorated mortar joints. It does not automatically repair every part of a chimney that can admit water or show masonry damage, so identify the component before deciding which repair fits.

Signs the Chimney Mortar Needs Attention

Look for patterns rather than treating one stain or loose fragment as a complete diagnosis. Observe the chimney from the ground, and do not climb onto the roof or chip mortar to test it.

• Gaps or missing mortar — Open joints leave visible gaps between masonry units. Note whether the gaps appear in one small area or across multiple sides.
• Cracking or crumbling joints — Mortar that is visibly cracked, powdering, or breaking away may no longer be holding the joint together well. Do not scrape it out; have the affected area assessed.
• Loose pieces near the chimney — Fragments on the ground or roof can signal deteriorating mortar or damaged masonry. Keep people clear of loose material and report where you see it.
• Water marks or interior dampness — A stain near the chimney can come from more than one source, including joints, the crown, or roof flashing. Track when it appears and where it shows inside; see why a chimney may leak when it rains.

Need help now? (385) 243-7715

How to Check Chimney Mortar Without Climbing

These steps help you describe the visible condition; they are not a repair procedure. Tuckpointing involves working on masonry at height, so leave roof access, mortar removal, and replacement work to a chimney professional.

1. Start from a safe spot on the ground — Choose a position where you can see the chimney without standing under loose masonry. Check that the area is clear of falling debris before you look up.
2. Use binoculars if details are hard to see — Binoculars can make visible joints easier to inspect from the ground. Look for open gaps, cracks, and missing mortar; do not use a ladder to get closer.
3. Check each visible side — Move to safe viewpoints around the home and compare the sides you can see. Note whether the damage is confined to one patch or appears in several places.
4. Look at the bricks as well as the joints — Check for cracked, flaking, or broken bricks beside the mortar damage. Record those separately because tuckpointing alone may not address damaged masonry units.
5. Observe the crown and roof junction from the ground — If visible, note cracks or deterioration at the chimney top and any apparent gap where the chimney meets the roof. Do not climb up to touch or probe either area.
6. Check indoors for related signs — Look for damp marks near the chimney and note when they occur, such as after rain. A flashlight can help you see a visible interior surface, but do not enter the flue or dismantle fireplace parts.
7. Take dated photos from the same safe viewpoints — Use a phone camera to record the affected areas and their location on the chimney. Comparing photos later can show whether visible damage has changed.
8. Arrange an assessment before attempting a patch — Share what you observed and ask whether the issue calls for tuckpointing or another masonry repair. Avoid applying surface filler or removing mortar before the cause and scope are assessed.

Which Starting Price Applies to Your Chimney Situation?

If you can see deteriorated joints but cannot tell whether nearby bricks or the chimney top are also affected, a chimney inspection starts at $39. The inspection price is separate from any tuckpointing repair; the repair quote depends on what needs work.

If the damaged mortar and affected area are already clear, ask for a tuckpointing quote based on that specific scope. The confirmed prices include chimney cleaning from $89, but cleaning removes chimney deposits and is not a substitute for repairing masonry joints.

For either situation, describe what you can see rather than choosing a repair based only on a stain or loose fragment. We explain the work clearly and recommend only the services a homeowner needs.

What Can Go Wrong With a Chimney Mortar Patch

A surface smear can hide a deteriorated joint without removing the failed mortar underneath. It can also make it harder to see whether the joint continues to break down, so avoid covering damaged areas before an assessment.

Mortar must be suitable for the masonry around it. A repair that is too hard or otherwise incompatible can put stress on older brick or stone; choosing the right mortar and preparing the joint are part of the repair, not cosmetic details.

Treating every leak as a tuckpointing problem can leave the actual entry point untouched. Water can enter through different parts of a chimney, so the crown, roof flashing, masonry, and visible interior signs all matter when identifying the repair.

Need help now? (385) 243-7715

When to Call for Chimney Tuckpointing

Call a chimney sweep when mortar is missing or crumbling, masonry units are cracked, loose pieces have fallen, or water appears near the chimney. Do not climb onto the roof or try to remove mortar yourself; a professional can assess whether tuckpointing is appropriate and whether another component also needs attention.

To book, call Utah Chimney Sweep at (385) 243-7715. We are open 24 hours a day, 7 days a week, and serve Salt Lake City and towns across the Wasatch Front within 60 miles. You can also use our contact page to request an assessment.

Frequently asked questions